Display products layout style ( any number of products and columns).
Products Layout
Carousel layout
$0
The MTX 3297Ex is a high-precision ASYC IV series 60,000-point TRMS digital multimeter, designed specifically for use in potentially explosive Ex zones and is certified Ex/IEC Ex:
- IIC (gas): Zones 0, 1, 2
- IIIC (dust): Zones 20, 21, 22
- Mines: M1
This device meets the most demanding criteria for permanent use in all Ex zones. It measures voltage, current, resistance, capacitance, frequency, temperature, and diodes with high accuracy. Outside the Ex zones, it functions as a high-performance 1000V CAT III / 600V CAT IV industrial multimeter. The MTX 3297Ex comes with ATEX-specific batteries and fuse, and you can download the SX-DMM software for free from our website.
Chauvin Arnoux models C.A 6522, C.A 6524 and C.A 6526 are simple-to-use insulation and continuity testers designed for industrial maintenance operations. They are particularly popular for use in planned periodic insulation tests on installations and equipment. This helps prevent incidents by detecting ageing and the premature deterioration of insulation characteristics.
Chauvin Arnoux models C.A 6522, C.A 6524 and C.A 6526 are simple-to-use insulation and continuity testers designed for industrial maintenance operations. They are particularly popular for use in planned periodic insulation tests on installations and equipment. This helps prevent incidents by detecting ageing and the premature deterioration of insulation characteristics.
Sold out
The C.A 6543 Megohmmeter supports extreme site conditions and is expert in qualitative insulation analysis. The CA 6543 is a 50V to 1kV high performance insulation tester.
Insulation: up to 4TΩ (5 cal.) at 50 / 100 / 250 / 500 and 1000V DC
Automatic calculation of insulation quality ratios: DAR and PI
Programmable test period and plotting of the R(t) curve
$0
The C.A 6681 LOCAT-N Cable Locator is simple to use on both current-carrying and non-current-carrying mains circuits. Its digital technology overcomes interference and disturbance signals to provide precise location details. The receiver displays the value of the signal measured, which is also shown on the bar chart or in the form of acoustic signals whose amplitudes vary in proportion to the signal distance.
- Identify a fuse, circuit-breaker, etc.
- Track a cable in a wall
- Determine the location of a cut in the circuit
- Locate short-circuits
- Locate cable ducts in a house
- Detect buried conductors
$0
The C.A 5275 digital multimeter is particularly compact, making it very easy to handle.
The C.A 5275 is a stand-alone portable digital multimeter specially designed to combine all the functions for measurement of the following electrical quantities in a single instrument
The double 6000 count display is equipped with a 61 + 2-segment bargraph with dual-mode remanent effect
The bargraph has a central zero
Designed for maintenance and test departments working in industrial or administrative buildings, the CA 8336 QualiStar Plus can be used to obtain a snapshot of the main features characterizing the quality of the electrical network. Easy to handle and compact, the QualiStar+ offers a large number of calculated values and several processing functions.
- Voltage quality diagnostics
- Full compliance with IEC 61000-4-30 Class A Ed 3
- Highly communicating instrument
- Qualistar range of easy-to-use products
- Alarms, recordings, transients, Inrush, etc.
Download Chauvin Arnoux CA 8345 Brochure
Compact and simple to use, the CA 1631 calibrator is equipped with a wide screen for comfortable reading.
– Large measurement range: 1,500 Ω / 500 µH / 40A
– Alarms on Ω, A and V
– Automatic Pre-Hold mode when the clamp is opened
– 2,000 storage locations
– Real-time clock for time/date-stamping of measurements
– Automatic calibration of jaw opening distance at start-up
– Buzzer and automatic power-off
– Bluetooth communication interface
– GTC data transfer software
– Large measurement range: 1,500 Ω / 500 µH / 40A
– Alarms on Ω, A and V
– Automatic Pre-Hold mode when the clamp is opened
– 300 storage locations
– Real-time clock for time/date-stamping of measurements
– Automatic calibration of jaw opening distance at start-up
– Buzzer and automatic power-off
The Chauvin Arnoux CA1510 Indoor Air Quality CO2 Logger is a portable tool designed to monitor and ensure a healthy environment through both audible and visual alerts. Accurate and compliant with the latest air quality monitoring standards, the CA1510 measures CO2, temperature and humidity with up to one million readings stored internally. Carbon dioxide is a colourless, odourless gas making it difficult to detect, it can be the cause of headaches, nausea and difficulty concentrating. Temperature and humidity can also be a reason for low air quality and contribute to mould spores in the environment.
- Offices
- Meeting Rooms
- Classrooms
- Hospitals
- Factories
- Public Transport
- Personal Residences
For installation, inspection and maintenance teams, the C.A 6608 phase rotation tester is an essential tool for identifying the order of the phases on an electrical installation and detecting any phase loss.
Identification of the phases makes it easier to ensure correct, safe wiring of your installations, thus preventing damage to the equipment connected to the three-phase network
The phase order is determined as soon as the cables are connected.
The results are displayed on an LCD screen.
Highlights
- Possibility of recordings covering several months
- Breakdown of energy losses
- Installation without cutting off the mains supply
- Android application with motor diagnostics
Description
The PEL 103 measures and records all the power and energy values.
It can be used wherever there is electricity:
• electricity generator: renewable energies, thermal energy, etc.
• industries: metallurgy, glassmaking, agri-food
• residential buildings, tertiary, etc.
• infrastructure and transport
• datacenters, etc.
Applications
• Energy audits
• Electrical diagnostics
• Industrial maintenance
Simple, effective ergonomics
• compact and magnetized
• 3 voltage inputs and 3 current inputs
• quadruple backlit digital display
• self-powered via the phase
Chauvin Arnoux models C.A 6522, C.A 6524 and C.A 6526 are simple-to-use insulation and continuity testers designed for industrial maintenance operations. They are particularly popular for use in planned periodic insulation tests on installations and equipment. This helps prevent incidents by detecting ageing and the premature deterioration of insulation characteristics.
$0
The comprehensive CA 5277 multimeter is equipped with all the functions needed for testing, maintenance and inspections The CA 5277 digital Multimeter is particularly compact, making it very easy to handle.
The CA 5277 is a stand-alone portable digital Multimeter specially designed to combine all the functions for measurement of the following electrical quantities in a single instrument
The double 6000 count display is equipped with a 61 + 2-segment bargraph with dual-mode remnant effect
Sold out
The C.A 6543 Megohmmeter supports extreme site conditions and is expert in qualitative insulation analysis. The CA 6543 is a 50V to 1kV high performance insulation tester.
Insulation: up to 4TΩ (5 cal.) at 50 / 100 / 250 / 500 and 1000V DC
Automatic calculation of insulation quality ratios: DAR and PI
Programmable test period and plotting of the R(t) curve
The Chauvin Arnoux F402 clamp meter is designed for medium-power low-voltage applications in sectors such as LV electricity production and distribution, industry, railways.
This clamp multimeter is also suitable for lift/elevator technicians and other lifting and transport specialists.
The F205 clamp multimeter is ideal for the needs of self-employed electricians and small and medium-sized business and industries in the electrical sector
Simple to use, the clampmeter offers all the necessary functions in a single, compact solution
Equiped with a fast 12-bit TRMS digital acquisition system
Current: 600 AAC/ 900 ADC
AC and DC voltage up to 1000 V
W/VA/var, PF power values
With its compact design and built-in test probes, you can take the C.A 703 with you everywhere you go.
- AC and DC voltages: 200 mV to 600 V
- Current: 200 µA to 200 mA
- Resistance: 200 OHM to 20 MOHM
- Continuity test (buzzer) and diode test
- Safety: IEC 61010 – 600 V CAT IV / 1000 V CAT III
$88
The F201 clamp multimeter is ideal for the needs of self-employed electricians and small and medium-sized business and industries in the electrical sector.
Simple to use, the clamp meter offers all the necessary functions in a single, compact solution.
Equiped with a fast 12-bit TRMS digital acquisition system
Simple to use, the clamp meter offers all the necessary functions in a single, compact solution.
Equiped with a fast 12-bit TRMS digital acquisition system
- 6000 counts LCD display
- AC and DC voltage up to 1000 V
- Resistance and audible continuity
- Min and Max analysis
- TrueInrush current measurement
- IP54 protection
Designed for maintenance and test departments working in industrial or administrative buildings, the CA 8336 QualiStar Plus can be used to obtain a snapshot of the main features characterizing the quality of the electrical network. Easy to handle and compact, the QualiStar+ offers a large number of calculated values and several processing functions.
- Voltage quality diagnostics
- Full compliance with IEC 61000-4-30 Class A Ed 3
- Highly communicating instrument
- Qualistar range of easy-to-use products
- Alarms, recordings, transients, Inrush, etc.
Download Chauvin Arnoux CA 8345 Brochure
Compact and simple to use, the CA 1631 calibrator is equipped with a wide screen for comfortable reading.
– Large measurement range: 1,500 Ω / 500 µH / 40A
– Alarms on Ω, A and V
– Automatic Pre-Hold mode when the clamp is opened
– 2,000 storage locations
– Real-time clock for time/date-stamping of measurements
– Automatic calibration of jaw opening distance at start-up
– Buzzer and automatic power-off
– Bluetooth communication interface
– GTC data transfer software
– Large measurement range: 1,500 Ω / 500 µH / 40A
– Alarms on Ω, A and V
– Automatic Pre-Hold mode when the clamp is opened
– 300 storage locations
– Real-time clock for time/date-stamping of measurements
– Automatic calibration of jaw opening distance at start-up
– Buzzer and automatic power-off
The Chauvin Arnoux CA1510 Indoor Air Quality CO2 Logger is a portable tool designed to monitor and ensure a healthy environment through both audible and visual alerts. Accurate and compliant with the latest air quality monitoring standards, the CA1510 measures CO2, temperature and humidity with up to one million readings stored internally. Carbon dioxide is a colourless, odourless gas making it difficult to detect, it can be the cause of headaches, nausea and difficulty concentrating. Temperature and humidity can also be a reason for low air quality and contribute to mould spores in the environment.
- Offices
- Meeting Rooms
- Classrooms
- Hospitals
- Factories
- Public Transport
- Personal Residences
For installation, inspection and maintenance teams, the C.A 6608 phase rotation tester is an essential tool for identifying the order of the phases on an electrical installation and detecting any phase loss.
Identification of the phases makes it easier to ensure correct, safe wiring of your installations, thus preventing damage to the equipment connected to the three-phase network
The phase order is determined as soon as the cables are connected.
The results are displayed on an LCD screen.
Highlights
- Possibility of recordings covering several months
- Breakdown of energy losses
- Installation without cutting off the mains supply
- Android application with motor diagnostics
Description
The PEL 103 measures and records all the power and energy values.
It can be used wherever there is electricity:
• electricity generator: renewable energies, thermal energy, etc.
• industries: metallurgy, glassmaking, agri-food
• residential buildings, tertiary, etc.
• infrastructure and transport
• datacenters, etc.
Applications
• Energy audits
• Electrical diagnostics
• Industrial maintenance
Simple, effective ergonomics
• compact and magnetized
• 3 voltage inputs and 3 current inputs
• quadruple backlit digital display
• self-powered via the phase
Grid layout
Designed for maintenance and test departments working in industrial or administrative buildings, the CA 8336 QualiStar Plus can be used to obtain a snapshot of the main features characterizing the quality of the electrical network. Easy to handle and compact, the QualiStar+ offers a large number of calculated values and several processing functions.
- Voltage quality diagnostics
- Full compliance with IEC 61000-4-30 Class A Ed 3
- Highly communicating instrument
- Qualistar range of easy-to-use products
- Alarms, recordings, transients, Inrush, etc.
Download Chauvin Arnoux CA 8345 Brochure
Compact and simple to use, the CA 1631 calibrator is equipped with a wide screen for comfortable reading.
– Large measurement range: 1,500 Ω / 500 µH / 40A
– Alarms on Ω, A and V
– Automatic Pre-Hold mode when the clamp is opened
– 2,000 storage locations
– Real-time clock for time/date-stamping of measurements
– Automatic calibration of jaw opening distance at start-up
– Buzzer and automatic power-off
– Bluetooth communication interface
– GTC data transfer software
– Large measurement range: 1,500 Ω / 500 µH / 40A
– Alarms on Ω, A and V
– Automatic Pre-Hold mode when the clamp is opened
– 300 storage locations
– Real-time clock for time/date-stamping of measurements
– Automatic calibration of jaw opening distance at start-up
– Buzzer and automatic power-off
The Chauvin Arnoux CA1510 Indoor Air Quality CO2 Logger is a portable tool designed to monitor and ensure a healthy environment through both audible and visual alerts. Accurate and compliant with the latest air quality monitoring standards, the CA1510 measures CO2, temperature and humidity with up to one million readings stored internally. Carbon dioxide is a colourless, odourless gas making it difficult to detect, it can be the cause of headaches, nausea and difficulty concentrating. Temperature and humidity can also be a reason for low air quality and contribute to mould spores in the environment.
- Offices
- Meeting Rooms
- Classrooms
- Hospitals
- Factories
- Public Transport
- Personal Residences
For installation, inspection and maintenance teams, the C.A 6608 phase rotation tester is an essential tool for identifying the order of the phases on an electrical installation and detecting any phase loss.
Identification of the phases makes it easier to ensure correct, safe wiring of your installations, thus preventing damage to the equipment connected to the three-phase network
The phase order is determined as soon as the cables are connected.
The results are displayed on an LCD screen.
Highlights
- Possibility of recordings covering several months
- Breakdown of energy losses
- Installation without cutting off the mains supply
- Android application with motor diagnostics
Description
The PEL 103 measures and records all the power and energy values.
It can be used wherever there is electricity:
• electricity generator: renewable energies, thermal energy, etc.
• industries: metallurgy, glassmaking, agri-food
• residential buildings, tertiary, etc.
• infrastructure and transport
• datacenters, etc.
Applications
• Energy audits
• Electrical diagnostics
• Industrial maintenance
Simple, effective ergonomics
• compact and magnetized
• 3 voltage inputs and 3 current inputs
• quadruple backlit digital display
• self-powered via the phase
List Layout Style
Ajax Infinitive Layout
Designed for maintenance and test departments working in industrial or administrative buildings, the CA 8336 QualiStar Plus can be used to obtain a snapshot of the main features characterizing the quality of the electrical network. Easy to handle and compact, the QualiStar+ offers a large number of calculated values and several processing functions.
- Voltage quality diagnostics
- Full compliance with IEC 61000-4-30 Class A Ed 3
- Highly communicating instrument
- Qualistar range of easy-to-use products
- Alarms, recordings, transients, Inrush, etc.
Download Chauvin Arnoux CA 8345 Brochure
Compact and simple to use, the CA 1631 calibrator is equipped with a wide screen for comfortable reading.
– Large measurement range: 1,500 Ω / 500 µH / 40A
– Alarms on Ω, A and V
– Automatic Pre-Hold mode when the clamp is opened
– 2,000 storage locations
– Real-time clock for time/date-stamping of measurements
– Automatic calibration of jaw opening distance at start-up
– Buzzer and automatic power-off
– Bluetooth communication interface
– GTC data transfer software
– Large measurement range: 1,500 Ω / 500 µH / 40A
– Alarms on Ω, A and V
– Automatic Pre-Hold mode when the clamp is opened
– 300 storage locations
– Real-time clock for time/date-stamping of measurements
– Automatic calibration of jaw opening distance at start-up
– Buzzer and automatic power-off
The Chauvin Arnoux CA1510 Indoor Air Quality CO2 Logger is a portable tool designed to monitor and ensure a healthy environment through both audible and visual alerts. Accurate and compliant with the latest air quality monitoring standards, the CA1510 measures CO2, temperature and humidity with up to one million readings stored internally. Carbon dioxide is a colourless, odourless gas making it difficult to detect, it can be the cause of headaches, nausea and difficulty concentrating. Temperature and humidity can also be a reason for low air quality and contribute to mould spores in the environment.
- Offices
- Meeting Rooms
- Classrooms
- Hospitals
- Factories
- Public Transport
- Personal Residences
For installation, inspection and maintenance teams, the C.A 6608 phase rotation tester is an essential tool for identifying the order of the phases on an electrical installation and detecting any phase loss.
Identification of the phases makes it easier to ensure correct, safe wiring of your installations, thus preventing damage to the equipment connected to the three-phase network
The phase order is determined as soon as the cables are connected.
The results are displayed on an LCD screen.
Highlights
- Possibility of recordings covering several months
- Breakdown of energy losses
- Installation without cutting off the mains supply
- Android application with motor diagnostics
Description
The PEL 103 measures and records all the power and energy values.
It can be used wherever there is electricity:
• electricity generator: renewable energies, thermal energy, etc.
• industries: metallurgy, glassmaking, agri-food
• residential buildings, tertiary, etc.
• infrastructure and transport
• datacenters, etc.
Applications
• Energy audits
• Electrical diagnostics
• Industrial maintenance
Simple, effective ergonomics
• compact and magnetized
• 3 voltage inputs and 3 current inputs
• quadruple backlit digital display
• self-powered via the phase